| Customization: | Available |
|---|---|
| Max Diameter of Workpiece: | <500mm |
| Mass Scope of Workpiece: | <900kg |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Main Features
The ultrasonic atomization method is to spray the solution onto the substrate after atomization, so as to obtain the desired material structure, and the upper heating and baking structure can be selected. This material preparation method is particularly suitable for depositing oxides and has a long history of application in the preparation of transparent electrodes. Now this method is widely used in the preparation of perovskite solar cells.
Technical Parameters
|
Product Name |
VTC-300USS Ultrasonic Spin-Spray Coater/Glue Sprayer |
|
|
Product Model |
VTC-300USS |
|
|
Installation Conditions |
This equipment is required to be used at an altitude of 1000m or less, a temperature of 25ºC±15ºC, and a humidity of 55%Rh±10%Rh. 1. Water: NOT needed 2. Electricity: AC220V 50Hz, must have good grounding 3. Gas: The nozzle of the equipment is pneumatically assisted, and an air compressor or gas cylinder (including a pressure reducing valve) is required. 4. Workbench: covering an area of more than 2m2 5. Ventilation device: needed |
|
|
Main Parameters (Specification) |
1. Input power supply: 220V 250W 50Hz/60Hz |
|
|
2. Spin coating module * diameter of substrate: 200mm, maximum speed: up to 3000rpm * diameter of substrate: 300mm, maximum speed: up to 3000rpm |
||
|
3. Ultrasonic atomization module Particle size: 10um-20um Flow rate: 0.6pl~4ml/min Solid content: ≤ 10% Viscosity: ≤ 100cPs |
|
|
|
4. Liquid injection system Our company provides various forms of liquid supply systems (single-channel, multi-channel, heating, etc.) |
|
|
){kind=link}