Desktop Precision Diamond Wire Saw With Touch Screen Control -- STX-202A
TX-202A (STX-202A is an upgraded version of STX-202 since Mar 2014 with additional auto-control Y-axis) is a CE certified, small precision diamond wire saw for cutting sample ≤ 2" diameter or square up to 50mm in thickness. It is designed to provide a smooth cutting for many kinds of materials, especially for fragile crystals and TEM or IC sample by using 0.28mm diameter x 15-meter long diamond impregnated wire. It is an ideal cutting tool for material research, TEM sample preparation, and IC failure analysis.
SPECIFICATION:
| Power |
- Wire Saw Control Consol: Universal 110V or 240VAC 50/60Hz, 200W max.
|
Structure
|
- Heavy-duty aluminum alloy structure with compact size
- automatically controlled Y-axis by the digital panel
- single wire swing cutting with adjustable wire length from 5-15mm (broken wire still can be used)
- Transparent plastic plates are included to prevent Coolant splashing
- Add an oil refill cup behind the forming tube (New design), please apply 10-15 drops Anti-Wear Oil before first-time use.
- Wire spooler motor, 3 Amps, Torque=1.8Nm
|
Sample stage
|
- Z axis: 50mm, automatically controlled by the digital panel
- Y-axis: 50mm, automatically controlled by the digital panel
- Two dimension sample stage built in 360° degree horizontal rotating and +/-10° tilting vis manual operation
- Optional: 3 dimensions automatically controlled sample holder ( Y+Y +360° flat rotation ) is available upon request at extra cost
|
Cutting parameters
|
- Feed Speed: 0.01 mm/min to 40 mm/min adjustable
- Back Speed: 1 mm/min to 100 mm/min adjustable
- Spooler spin speed: 1-260 RPM adjustable
- Cutting depth: 0.1 - 50mm
- Positional accuracy: +/- 0.01 mm
- Please click the picture left to see the samples cut by this machine
|
| Meteorite Sample |
- Please click the picture below to view the meteorite samples that were cut by our wire saws.
Fig. 2 Fig. 3 Fig. 4 |
| Controller & Touch Screen |
- Color touchscreen controller will set up wire travel speed, cutting speed along Z axis and cutting width along Y axis
|
| Diamond wire |
- ≤ 15 meters used for each installation
- One spool of 0.30mm Dia x 20 meter length Diamond Wire is included for immediate use
- A Diamond Blade Dressing Stone is included for keeping the wire sharp.
- Optional:
- For slicing or dicing very brittle crystal, you may order 0.22 mm Dia. Diamond Wire. Note that 0.22mm Dia. The wire is very easy to break, please reduce feeding rate to the minimum. click the picture below to order spare diamond wires
- For longer wire life, please use LubeCool -150 Smart Solid Lubricant and Coolant
- For better lighting, please consider a Fiber Optic Y-shape Dual Light Microscope Illuminator
|
Wire tension system
|
- Standard: Steel spring wire tension system with break wire alarm
- Optional: Pneumatic tension system: The wire saw can be upgraded with the pneumatic tension system at extra cost. Because cutting wires with different diameters have different tension requirement for optimizing the cutting performance. With the pneumatic tensions system, the wire saw can handle different cutting wires from 0.1mm - 0.5mm dia. An air compressor is required. Please review pic.left and contact us for detail information.
|
| Water Pump |
- One water pump is included for cooling diamond wire during cutting. (the pump voltage is the same as the saw voltage)
- You must use anti-corrosive oil or radiator water as coolant ( buy from any auto store )
- Warning: must clean the machine after each cutting, especially using tap water as the coolant to prevent rust.
|
| |
|
Product dimensions
|
- Saw: 414mm(L) × 500mm(W) × 750mm(H)
- Controller: 340mm(L) x 290mm(W) x 170mm(H) ( Click to enlarge the picture below for detail size )
|
| Shipping dimensions |
48"(L) x 40"W) x 45" (H) |
| Shipping Weight |
220 lbs |
| Warranty |
One year limited with lifetime support, not including cutting wire |
Audited Supplier 
){kind=link}